Call Us Today!
1-919-535-3180
sales@plcfactory.com

GE Fanuc Genius PLC

IC660HHM501 | GE Fanuc

In Stock

Ships Today!

Immediate Availablity: 12 Units!

To get your part repaired
Call: 1-800-360-6802


Manufacturer GE Fanuc
Description Hand-Held Monitor with Cable & Charger
Weight 4 lbs :: ≈ 2 kgs
Warranty 1 Years
Revisions: IC660HHM501A , IC660HHM501B , IC660HHM501C , IC660HHM501D , IC660HHM501E , IC660HHM501F , IC660HHM501G , IC660HHM501H , IC660HHM501I , IC660HHM501J , IC660HHM501K , IC660HHM501L , IC660HHM501M , IC660HHM501N , IC660HHM501O , IC660HHM501P , IC660HHM501Q , IC660HHM501R , IC660HHM501S , IC660HHM501T , IC660HHM501U , IC660HHM501V , IC660HHM501W , IC660HHM501X , IC660HHM501Y , IC660HHM501Z ,

The following table shows which Hand-held Monitor versions are compatible with specific Genius I/O, Field Control, and related products. Note that the functionality of an older Hand-held Monitor can be upgraded by replacing its firmware PROM. (PROM installation instructions are in chapter 2). Product Type Product Catalog Number Requires this Handheld Monitor Version (or later) 24/48VDC Analog 4 Input/2 Output block 24/48VDC RTD 6 Input block 24/48VDC Thermocouple 6 Input block 24/48VDC Current-Source Analog 4 Input/2 Output block 24/48VDC Current-Source Analog 6 Output block 115VAC Analog 4 Input/2 Output block 115VAC/125VDC RTD 6 Input block 115VAC/125VDC Thermocouple 6 Input block 115VAC/125VDC Current-Source Analog 4 Input/2 Output block 115VAC/125VDC Current-Source Analog 6 Output block 24/48VDC Source 16 I/O block 24/48VDC Sink 16 I/O block 24VDC Source 16 I/O block 24VDC Sink 16 I/O block 12/24VDC Source 32 I/O block 5/12/24VDC Sink 32 I/O block 115VAC 8 I/O block 115VAC 8 I/O Low Leakage block 115VAC 16 Input block 115VAC/10-30VDC High-Speed Counter block, v1.x 115VAC/10-30VDC High-Speed Counter block, v2.0 115/230VAC Relay Normally-closed 16 Output block 115/230VAC Relay Normally-open 16 Output block 115VAC/125VDC 8 I/O Isolated Block with Failed Switch Diagnostic 115VAC/125VDC 8 I/O Isolated without Failed Switch Diagnostic 115-230VAC/125VDC PowerTRAC block, v.2.2 or earlier 115-230VAC/125VDC PowerTRAC block, v.2.3 IC660BBA020 IC660BBA021 IC660BBA023 IC660BBA024 IC660BBA025 IC660BBA100 IC660BBA101 IC660BBA103 IC660BBA104 IC660BBA105 IC660BBD020 IC660BBD021 IC660BBD022 IC660BBD023 IC660BBD024 IC660BBD025 IC660BBD100 IC660BBD101 IC660BBD110 IC660BBD120 IC660BBD120D IC660BBR100 IC660BBR101 IC660BBS100 IC660BBS101 IC660BPM100 IC660BPM100C any IC660HHM501B (v2.0) IC660HHM501D (v3.5) IC660HHM501E (v3.7) IC660HHM501G (v4.0) any IC660HHM501B (v2.0) IC660HHM501D (v3.5) IC660HHM501E (v3.7) IC660HHM501G (v4.0) any any any any IC660HHM501B (v2.0) IC660HHM501B (v2.0) any any IC660HHM501B (v2.0) IC660HHM501D (v3.5) IC660HHM501G (v4.0) IC660HHM501B (v2.0) IC660HHM501B (v2.0) any any IC660HHM501D (v3.5) IC660HHM501G (v4.0) Series Five Genius Bus Controller Series 90-70 Genius Bus Controller Series Six Genius Bus Controller with Diagnostics Series Six Genius Bus Controller without Diagnostics Series 90-30 GENIUS Communications Module GENIUS Network Interface (GENI) module IBM PC Interface Module (PCIM) GENIUS Network Interface (GENI) module with inverted connector IC655BEM510 IC697BEM731 IC660CBB902 IC660CBB903 IC693CMM301 IC660ELB905 IC660ELB906 IC660ELB910 IC660HHM501C (v3.0) IC660HHM501F (v3.8) any any IC660HHM501C (v3.0) any any any Series 90-70 Remote I/O Scanner IC697BEM733 IC660HHM501G (v4.0) 24/48VDC Bus Switching Module (BSM) 115VAC/125VDC Bus Switching Module (BSM) IC660BSM021 IC660BSM115 any Field Control products (all) IC670xxxxxx IC660HHM501J (v4.6) 1 GFK-0121E Chapter 1 Introduction 1-5 HHM Specifications Operating temperature 0 60 C(32 140 F) Storage temperature 40 to +70 C( 40 to 158 F) Humidity 5-95% (non-condensing) Weight: without case 1.3 lbs (0.6 Kg) with case 1.8 lbs (0.8 Kg) Size (HxWxD): without case 8.00 x 3.75 x 1.25 (cmx) with case 10.85 x 4.30 x 2.25 Required AC power (for battery charger) 115/230VAC 15%, 47-63 Hz (16-hour charging period for IC660BPM500B. 8-hour charging period for IC660BPM500A, now discontinued.) Fully charged operation 6 hours Display characters 4 lines each of 16 LCD (0.2 - 5 mm high) Keyboard 20 sealed keys with tactile feedback Features Performs Genius I/O block configuration, monitors I/O data on Genius bus, displays diagnostic information. Display language English, German, French, or Italian Drop Test Survives drop from 4 feet (1.2 meters) to concrete floor landing on any surface or corner without affecting its operation. Data Rates 153.6 Kbaud standard, 153.5 Kbaud extended, 76.8 Kbaud, 38.4 Kbaud Ordering Information Description Catalog Number Hand-Held Monitor (includes all items listed below) IC660HHM501 Cable from HHM to I/O Block IC660HHC005 Battery Pack IC660BPM500 Battery Charger IC660BCM501 Optional Accessories External HHM Connector: A panel-mountable or DIN rail-mountable HHM connector (catalog number 44A736310-001-R001) is available. It can be used to provide a permanent HHM connection point on a Genius bus. See chapter 2 for a description. 230VAC Power Adapter: An optional 230VAC Power Adapter (IC660MCA512) can be used to connect the Hand-held Monitor Charger to variety of 230 VAC power outlets by means of a standard computer cable (not supplied). See chapter 2 for a description. Extra HHM Keys: For applications requiring extra keys for the Hand-held Monitor, a group of five sets can be ordered separately. The catalog number is IC660MKS511.